Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › CYLINDER HEAD
RM27T0E _51 Engine / Hybrid System _053665 1GD-FTV ENGINE MECHANICAL _0260520 CYLINDER HEAD A

1GD-FTV ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free from foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A337457E01
1.99,0.531 2.156,0.531 2.156,0.531 2.792,0.667 false 2.969,1.635 3.198,1.802 0.229,0.167 10 false *a 1.719,0.427 2.021,0.604 0.302,0.177 10 false 45° 3.083,0.604 3.417,0.76 0.333,0.156 10 false 25°

If the seating is too high on the intake valve face, use 25° and 45° cutters to correct the intake valve seat.

Text in Illustration
*a Width


b.
A337458E01
2.563,0.646 2.75,0.125 2.75,0.125 2.927,0.125 false 2.958,1.625 3.146,1.781 0.188,0.156 10 false *a 2.979,0.042 3.26,0.208 0.281,0.167 10 false 70° 2.854,0.51 3.135,0.677 0.281,0.167 10 false 45°

If the seating is too low on the intake valve face, use 70° and 45° cutters to correct the intake valve seat.

Text in Illustration
*a Width


c.

Check that the intake valve seat contact is in the middle of the intake valve face and has the following width.

Standard width:

1.2 to 1.6 mm (0.0472 to 0.0630 in.)



Hide 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free from foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A337459E01
1.958,0.552 2.125,0.552 2.125,0.552 2.76,0.688 false 2.969,1.615 3.198,1.781 0.229,0.167 10 false *a 1.708,0.448 2.01,0.625 0.302,0.177 10 false 45° 3.094,0.625 3.396,0.813 0.302,0.188 10 false 25°

If the seating is too high on the exhaust valve face, use 25° and 45° cutters to correct the exhaust valve seat.

Text in Illustration
*a Width


b.
A337460E01
2.573,0.583 2.719,0.115 2.719,0.115 2.896,0.115 false 2.958,1.615 3.146,1.771 0.188,0.156 10 false *a 2.948,0.042 3.229,0.208 0.281,0.167 10 false 70° 2.885,0.583 3.167,0.75 0.281,0.167 10 false 45°

If the seating is too low on the exhaust valve face, use 75° and 45° cutters to correct the exhaust valve seat.

Text in Illustration
*a Width


c.

Check that the seat contact is in the middle of the exhaust valve face and has the following width.

Standard width:

1.6 to 2.0 mm (0.0630 to 0.0787 in.)