Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL PRESSURE PULSATION DAMPER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260532 FUEL PRESSURE PULSATION DAMPER A

2TR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper assembly.


b.

Install the fuel pressure pulsation damper assembly with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).