Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL FILTER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260533 FUEL FILTER A

2TR-FE FUEL  FUEL FILTER  REPLACEMENT  


PROCEDURE

Hide 1.DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 23271F 4.DISCONNECT FUEL HOSE

a.

Disconnect the hose from the clamp.


b.

Hide 77251B 5.DISCONNECT FUEL MAIN TUBE

a.
A223398

Disconnect the fuel main tube (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 23300 6.REMOVE FUEL FILTER ASSEMBLY

a.
A223399

Remove the 3 bolts and fuel filter assembly.


Hide 23300 7.INSTALL FUEL FILTER ASSEMBLY

a.

Install the fuel filter assembly with the 3 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


Hide 77251B 8.CONNECT FUEL MAIN TUBE

a.

Connect the fuel main tube (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).


Hide 23271F 9.CONNECT FUEL HOSE


b.

Connect the hose to the clamp.


Hide 10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).