Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260537 FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) G

2TR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY (for 5 Door)

a.
A331215E01
0.351,2.511 0.488,2.657 0.137,0.147 10 F 1.484,2.595 0.515,2.595 false 0.356,4.309 0.493,4.455 0.137,0.147 10 E 1.471,4.389 0.515,4.389 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.


Hide 83320B 2.INSPECT FUEL SENDER GAUGE ASSEMBLY (for 3 Door)

a.
A223162E01
0.408,2.342 0.545,2.489 0.137,0.147 10 F 1.143,2.426 0.572,2.426 false 0.408,4.067 0.545,4.214 0.137,0.147 10 E 1.431,4.151 0.572,4.151 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Float position is F (upper) 12 to 18 Ω
Float position is E (lower) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.