Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL PUMP (for 5 Door)
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260539 FUEL PUMP(for 5 Door) G

2TR-FE FUEL  FUEL PUMP(for 5 Door)  INSPECTION  


PROCEDURE

Hide 23221 1.INSPECT FUEL PUMP

a.

Inspect the resistance of the fuel pump.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.2 to 3.0 Ω


If the result is not as specified, replace the fuel pump.



b.
A355197E01
0.581,0.413 0.709,0.576 0.128,0.163 10 2 1.473,0.503 0.725,0.503 false 2.577,0.405 2.715,0.574 0.137,0.169 10 1 2.558,0.497 1.961,0.497 false 0.031,0.001 0.222,0.187 0.192,0.187 10 *a

Inspect the operation of the fuel pump.

i.

Connect the positive (+) lead of the battery to terminal 1 of the connector and the negative (-) lead to terminal 2. Check that the fuel pump operates.

Text in Illustration
*a Component without harness connected
(Fuel Pump)

If the result is not as specified, replace the fuel pump.

NOTICE:
·

These tests must be performed within 10 seconds to prevent the coil from burning out.


·

Keep the fuel pump as far away from the battery as possible.


·

Always turn the voltage on and off on the battery side, not the fuel pump side.