Do not disconnect the hoses indicated in the illustration.
| *A | for Single Tank Type | *B | for Double Tank Type |
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type)
83320B
2.REMOVE FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type)
77131C
3.REMOVE NO. 1 FUEL SUB-TANK (for Single Tank Type)
Disconnect the fuel pump connector.
Detach the fuel pump wire harness clamp.
Disconnect the jet pump from the No. 1 fuel sub-tank.
| *1 | Jet Pump |
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 2 claws from the claw holes and remove the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
77131C
4.REMOVE NO. 1 FUEL SUB-TANK (for Double Tank Type)
Disconnect the fuel pump connector.
Detach the fuel pump wire harness clamp.
Disconnect the jet pump labeled A from the No. 1 fuel sub-tank.
| *1 | Jet Pump A |
| *2 | Jet Pump B |
Disconnect the jet pump labeled B from the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Detach the 2 claws and disconnect the jet pump A.
| *1 | Jet Pump A |
| *2 | Jet Pump B |
Remove the O-ring from the jet pump B.
Using a screwdriver, detach the 3 claws from the claw holes.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 2 claws from the claw holes and remove the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
77174
5.REMOVE NO. 1 FUEL SUCTION SUPPORT
Detach the 2 claws and remove the No. 1 fuel suction support.
23221
6.REMOVE FUEL PUMP
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
| *1 | Fuel Filter Case |
Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
Remove the O-ring and fuel pump spacer from the fuel pump.
| *1 | Fuel Pump Spacer |
| *a | O-Ring |