Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL PUMP (for 3 Door)
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260540 FUEL PUMP(for 3 Door) G

2TR-FE FUEL  FUEL PUMP(for 3 Door)  INSPECTION  


PROCEDURE

Hide 23221 1.INSPECT FUEL PUMP

a.

Inspect the resistance of the fuel pump.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.2 to 3.0 Ω


If the result is not as specified, replace the fuel pump.



b.
A223267E01
0.019,0.011 0.212,0.157 0.193,0.147 10 *a 0.697,0.84 0.821,0.984 0.123,0.144 10 2 1.41,0.931 0.846,0.931 false 2.671,0.842 2.795,0.987 0.123,0.144 10 1 2.638,0.929 2.074,0.929 false

Inspect the operation of the fuel pump.

i.

Connect the positive (+) lead of the battery to terminal 1 of the connector and the negative (-) lead to terminal 2. Check that the fuel pump operates.

Text in Illustration
*a Component without harness connected
(Fuel Pump)

If the result is not as specified, replace the fuel pump.

NOTICE:
·

These tests must be performed within 10 seconds to prevent the coil from burning out.


·

Keep the fuel pump as far away from the battery as possible.


·

Always turn the voltage on and off on the battery side, not the fuel pump side.