1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
89570A
2.REMOVE FUEL PUMP ECU
Disconnect the 2 connectors.
| *A | w/o Air Suspension |
| *B | w/ Air Suspension |
Remove the 2 bolts and fuel pump ECU.
Make sure the fuel pump ECU is not subjected to physical shocks, such as being dropped, etc.