Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260551 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

a.
A331219E01
0.425,2.379 0.562,2.526 0.137,0.147 10 F 1.472,2.464 0.589,2.464 false 0.425,4.338 0.562,4.485 0.137,0.147 10 E 1.331,4.423 0.589,4.423 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.


Hide 83320B 2.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
A334481E02
1.219,1.917 0.573,1.917 true 1.698,4.094 0.76,4.094 true 2.51,0.375 2.604,0.375 2.604,0.375 2.74,0.708 false 3.156,0.375 3.063,0.375 3.063,0.375 2.927,0.708 false 0.427,1.823 0.583,1.99 0.156,0.167 10 false F 0.594,4 0.75,4.177 0.156,0.177 10 false E 2.365,0.271 2.552,0.469 0.188,0.198 10 false 2 3.198,0.281 3.354,0.5 0.156,0.219 10 false 1

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.