Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PUMP (for Single Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260552 FUEL PUMP(for Single Tank Type) A

1GR-FE FUEL  FUEL PUMP(for Single Tank Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not disconnect the hoses indicated in the illustration.


A223122

HINT:

for Automatic Transmission:

Perform "Inspection After Repairs" after replacing the fuel pump (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION).


PROCEDURE

Hide 23070 1.INSTALL FUEL MAIN VALVE ASSEMBLY

a.
A223172E01
0.294,0.193 0.481,0.338 0.187,0.145 10 *1 0.504,0.284 1.8,0.284 1.8,0.284 1.8,0.641 false 0.713,0.981 0.713,0.284 false

Apply a light coat of gasoline to 2 new O-rings and install the O-rings to the fuel main valve.

Text in Illustration
*1 New O-Ring


b.

Install the fuel main valve to the fuel filter case.

NOTICE:

Make sure the O-rings are not cut or pinched during installation.



Hide 23221 2.INSTALL FUEL PUMP

HINT:

for Automatic Transmission:

Perform "Inspection After Repairs" after replacing the fuel pump (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION).


a.

Connect the fuel pump wire harness connector to the fuel pump.


b.
A223260E01
2.879,0.853 3.079,0.999 0.200,0.147 10 *2 2.252,0.939 2.849,0.939 false 2.879,0.424 3.079,0.571 0.200,0.147 10 *1 2.276,0.754 2.751,0.51 2.751,0.51 2.849,0.51 false

Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.

Text in Illustration
*1 New O-Ring
*2 Fuel Pump Spacer


c.
A223259E01
0.261,0.572 0.444,0.723 0.183,0.151 10 *1 1.069,0.659 0.469,0.659 false

Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.

Text in Illustration
*1 Fuel Filter Case


Hide 77131C 3.INSTALL NO. 1 FUEL SUB-TANK

a.
A223171

Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.


b.
A223170

Attach the 3 claws to the claw holes.


c.

Install the tube part to the No. 1 fuel sub-tank.

i.
A223268E01
0.227,1.492 0.414,1.641 0.187,0.149 10 *1 0.438,1.58 0.545,1.58 0.545,1.58 1.103,2.029 false

Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the No. 1 fuel sub-tank.



d.

Connect the jet pump to the No. 1 fuel sub-tank.

Text in Illustration
*1 Jet Pump


e.

Connect the fuel pump connector.