Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PUMP (for Double Tank Type) › 2015.06–2016.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260553 FUEL PUMP(for Double Tank Type) A

1GR-FE FUEL  FUEL PUMP(for Double Tank Type)  REMOVAL  


PROCEDURE

Hide 77100U 1.REMOVE FUEL TANK SUB-ASSEMBLY

a.

Remove the fuel tank sub-assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL TANK>REMOVAL).


Hide 77020A 2.REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.
A243483E01
0.299,0.182 0.610,0.366 0.311,0.184 10 SST 0.671,0.262 0.897,0.262 0.897,0.262 1.054,0.466 false

Set SST on the fuel pump gauge retainer.

SST
09808-14030  

HINT:
·

Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

·

Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).




b.
A243482E01
1.06,0.228 1.376,0.414 0.316,0.187 10 SST 1.438,0.308 1.616,0.308 1.616,0.308 1.788,0.666 false

Using SST, loosen the retainer.

SST
09808-14030  

Text in Illustration
V100135

Turn

HINT:

Fit the tips of SST onto the ribs of the retainer.


NOTICE:
·

When the retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.

·

Remove any foreign matter around the fuel suction with pump and gauge tube before this operation.




c.

Remove the retainer.


d.

Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge.



e.

Remove the gasket from the fuel tank.