83320
1.INSPECT FUEL SENDER GAUGE ASSEMBLY
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - 3 | Float position is F (upper) | 13.5 to 16.5 Ω |
| Float position is E (lower) | 405.5 to 414.5 Ω |
If the result is not as specified, replace the fuel sender gauge assembly.
83320B
2.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Float position is F (upper) | 13.5 to 16.5 Ω |
| Float position is E (lower) | 405.5 to 414.5 Ω |
If the result is not as specified, replace the fuel sender gauge assembly.