Home › Engine / Hybrid System › 1KD-FTV (FUEL) › INJECTOR DRIVER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260564 INJECTOR DRIVER A

1KD-FTV FUEL  INJECTOR DRIVER  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
·

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).



Hide 2.REMOVE INJECTOR DRIVER ASSEMBLY

a.
A220753

Disconnect the 3 connectors.


b.

Remove the 3 bolts and injector driver assembly.


Hide 89879B 3.REMOVE INJECTOR DRIVER BRACKET

a.
A365358

Remove the 3 screws and injector driver bracket.