Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL FILTER (for Engine Room Side) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260569 FUEL FILTER(for Engine Room Side) A

1KD-FTV FUEL  FUEL FILTER(for Engine Room Side)  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:

When replacing the filter, use TOYOTA genuine parts or equivalent parts.


PROCEDURE

Hide 23300J 1.REMOVE FUEL FILTER ASSEMBLY (w/ Fuel Heater)

a.
A223224

Disconnect the 2 fuel hoses.


b.

Disconnect the level warning switch connector and fuel heater connector.


c.

Remove the 2 nuts and fuel filter assembly.


Hide 23300J 2.REMOVE FUEL FILTER ASSEMBLY (w/ Clogging Switch)

a.
A223225

Disconnect the 2 fuel hoses.


b.

Disconnect the level warning switch connector and clogging switch connector.


c.

Remove the 2 nuts and fuel filter assembly.


Hide 3.DRAIN FUEL

a.
A223226

Loosen the fuel filter drain plug and drain the fuel from the fuel filter.


Hide 23910B 4.REMOVE FUEL HEATER ASSEMBLY (w/ Fuel Heater)

a.
A223227

Detach the fuel heater connector clamp from the fuel filter cap.


b.

Remove the 2 screws and fuel heater.


Hide 23931A 5.REMOVE FUEL FILTER COVER

a.
A223228

Detach the level warning switch connector clamp from the fuel filter cap.


b.

Remove the bolt, fuel filter cover and fuel filter gasket.


Hide 23303 7.REMOVE FUEL FILTER ELEMENT SUB-ASSEMBLY

a.
A223230E01
3.005,0.658 3.333,0.804 0.329,0.146 10 SST 2.378,0.74 2.952,0.74 false

Using SST, remove the fuel filter element.

SST
09228-64010  


Hide 23303 8.INSTALL FUEL FILTER ELEMENT SUB-ASSEMBLY

a.

Check and clean the installation surface of the fuel filter element.


b.

Apply fuel to the gasket of a new fuel filter element.


c.
A223231

Lightly screw the fuel filter element into place and tighten it until the gasket comes into contact with the seat.


d.

Tighten the fuel filter element an additional 3/4 turn by hand.


Hide 23931A 10.INSTALL FUEL FILTER COVER

a.

Install the fuel filter gasket and fuel filter cover to the fuel filter element assembly.


b.
A223228

Tighten the bolt.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


c.

Attach the level warning switch connector clamp to the fuel filter cap.


Hide 23910B 11.INSTALL FUEL HEATER ASSEMBLY (w/ Fuel Heater)

a.
A223227

Install the fuel heater with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


b.

Attach the fuel heater connector clamp to the fuel filter cap.


Hide 23300J 12.INSTALL FUEL FILTER ASSEMBLY (w/ Fuel Heater)

a.

Install the fuel filter assembly with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Connect the level warning switch connector and fuel heater connector.


c.

Connect the 2 fuel hoses.


Hide 23300J 13.INSTALL FUEL FILTER ASSEMBLY (w/ Clogging Switch)

a.

Install the fuel filter assembly with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Connect the level warning switch connector and clogging switch connector.


c.

Connect the 2 fuel hoses.