Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL FILTER (for Engine Room Side) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260569 FUEL FILTER(for Engine Room Side) G

1KD-FTV FUEL  FUEL FILTER(for Engine Room Side)  INSPECTION  


PROCEDURE

Hide 23910B 1.INSPECT FUEL HEATER ASSEMBLY (w/ Fuel Heater)

a.
A223223E01
3.183,1.999 3.374,2.144 0.191,0.145 10 *1 2.67,2.373 3.068,2.086 3.068,2.086 3.164,2.086 false

Measure the resistance according to the value(s) in the table below.

i.

Measure the resistance between terminal 2 and the heater body.


ii.

Apply a vacuum of 29 to 40 kPa (218 to 300 mmHg, 8.56 to 11.8 in.Hg) or higher to the vacuum switch port.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - Heater body 20°C (68°F) 0.5 to 2.0 Ω


Text in Illustration
*1 Heater Body

If the result is not as specified, replace the fuel heater assembly.



Hide 23301A 2.INSPECT FUEL FILTER CAP ASSEMBLY (w/ Clogging Switch)

a.

Inspect the clogging switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) Below 1 Ω


If the result is not as specified, replace the fuel filter cap assembly.