Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL SUPPLY PUMP › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260576 FUEL SUPPLY PUMP G

1KD-FTV FUEL  FUEL SUPPLY PUMP  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT FUEL SUPPLY PUMP

a.
A191340E04
0.861,1.405 0.978,1.554 0.116,0.150 10 2 0.861,1.774 0.978,1.924 0.116,0.150 10 1 1.042,0.506 1.171,0.506 1.171,0.506 1.565,1.152 false 0.992,1.494 1.121,1.494 1.121,1.494 1.672,1.245 false 0.982,1.859 1.111,1.859 1.111,1.859 1.708,1.296 false 0.823,0.423 1.014,0.569 0.192,0.147 10 *1

Inspect the suction control valve.

Text in Illustration
*1 Suction Control Valve

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.9 to 2.3 Ω


If the result is not specified, replace the suction control valve assembly.