Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260583 FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) G

1GD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY (for 5 Door)

a.
A329762E01
0.813,2.708 1.469,2.708 false 0.729,4.469 1.438,4.469 false 0.646,2.635 0.802,2.833 0.156,0.198 10 false F 0.594,4.385 0.75,4.583 0.156,0.198 10 false E

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.


Hide 83320B 2.INSPECT FUEL SENDER GAUGE ASSEMBLY (for 3 Door)

a.
A223162E01
0.408,2.342 0.545,2.489 0.137,0.147 10 F 1.143,2.426 0.572,2.426 false 0.408,4.067 0.545,4.214 0.137,0.147 10 E 1.431,4.151 0.572,4.151 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Float position is F (upper) 12 to 18 Ω
Float position is E (lower) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.