Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260584 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) G

1GD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

a.
A329766E01
0.482,2.546 0.620,2.693 0.137,0.147 10 F 1.483,2.631 0.646,2.631 false 0.482,4.366 0.620,4.513 0.137,0.147 10 E 1.327,4.451 0.646,4.451 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.


Hide 83320B 2.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
A223156E01
0.603,1.499 0.740,1.646 0.137,0.147 10 F 1.416,1.584 0.767,1.584 false 0.603,4.008 0.740,4.155 0.137,0.147 10 E 1.772,4.093 0.767,4.093 false 2.376,0.282 2.505,0.429 0.128,0.147 10 2 3.21,0.282 3.331,0.429 0.121,0.147 10 1 2.515,0.371 2.615,0.371 2.615,0.371 2.744,0.703 false 3.168,0.371 3.067,0.371 3.067,0.371 2.939,0.703 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.