Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL INJECTOR › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260590 FUEL INJECTOR G

1GD-FTV FUEL  FUEL INJECTOR  INSPECTION  


PROCEDURE

Hide 23670 1.INSPECT INJECTOR ASSEMBLY

a.

Inspect the injector assembly.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.52 to 0.66 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the injector assembly.


If the result is not as specified, replace the injector assembly.