Home › Engine / Hybrid System › 2TR-FE (EMISSION CONTROL) › PCV VALVE
RM27T0E _51 Engine / Hybrid System _053671 2TR-FE EMISSION CONTROL _0260598 PCV VALVE A

2TR-FE EMISSION CONTROL  PCV VALVE  INSTALLATION  


PROCEDURE

Hide 12204 1.INSTALL PCV VALVE SUB-ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the valve.

Adhesive:

Toyota genuine adhesive 1324, three bond 1324 or equivalent



b.

Using a 22 mm ball joint lock nut wrench, install the PCV valve.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).



c.

Connect the PCV hose.