Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › AIR PUMP(w/ Secondary Air Injection System)
RM27T0E _51 Engine / Hybrid System _053672 1GR-FE EMISSION CONTROL _0260602 AIR PUMP(w/ Secondary Air Injection System) A

1GR-FE EMISSION CONTROL  AIR PUMP(w/ Secondary Air Injection System)  INSTALLATION  


PROCEDURE

Hide 17610C 1.INSTALL AIR PUMP ASSEMBLY

a.
A223879C02
1.438,0.844 1.198,0.844 1.198,0.844 1.042,0.948 true 1.438,0.51 1.177,0.51 1.177,0.51 1.01,0.656 true 1.427,0.115 1.292,0.115 1.292,0.115 0.875,0.552 true 1.469,0.781 1.646,0.948 0.177,0.167 10 false *3 1.469,0.417 1.646,0.583 0.177,0.167 10 false *2 1.469,0.021 1.646,0.188 0.177,0.167 10 false *1 0.552,0.177 0.844,0.51 0.292,0.333 10 true .

Attach the 3 fittings of the air pump insulator to install the air pump to the bracket.

Text in Illustration
*1 Insulator
*2 Air Pump Assembly
*3 Air Pump Bracket


b.

Attach the wire harness clamp and air pump connector clamp.


c.

Install the air pump with bracket with the 3 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Connect the air pump connector and attach the wire harness clamp.


Hide 17341 2.INSTALL NO. 1 AIR INJECTION SYSTEM HOSE

U169286C01
6.208,0.75 6.385,0.75 6.385,0.75 6.448,0.656 false 4.823,3.271 4.75,3.271 4.75,3.271 4.688,2.875 true 5.156,2.063 5.052,2.063 5.052,2.063 4.896,2.813 true 4.146,1.344 4.208,1.344 4.208,1.344 4.604,1.042 true 4.927,0.479 4.833,0.479 4.833,0.479 4.76,0.979 true 6.76,0.521 7.073,0.708 0.313,0.188 10 false 90° 6.469,2.281 6.781,2.469 0.313,0.188 10 false 90° 5.906,0.667 6.219,0.854 0.313,0.188 10 false 45° 3.969,0.24 4.104,0.417 0.135,0.177 10 false A 3.969,2.021 4.104,2.198 0.135,0.177 10 false B 4,1.25 4.177,1.427 0.177,0.177 10 false *1 4.979,0.406 5.156,0.583 0.177,0.177 10 false *2 6.229,0.26 6.406,0.438 0.177,0.177 10 false *a 5.594,1.115 5.771,1.292 0.177,0.177 10 false *b 6.229,2.073 6.406,2.25 0.177,0.177 10 false *a 5.583,2.948 5.76,3.125 0.177,0.177 10 false *c 4.844,3.198 5.021,3.375 0.177,0.177 10 false *1 5.198,1.99 5.375,2.167 0.177,0.177 10 false *2

Text in Illustration
*1 Rib *2 Paint Mark
*a Upper *b RH Side
*c Front - -

a.

Connect the No. 1 air injection system hose to the air tube shown in the illustration labeled A.

HINT:
·

Make sure the paint mark of the No. 1 air injection system hose is facing upward.

·

Make sure the direction of the hose clamp is as shown in the illustration.




b.

Connect the No. 1 air injection system hose so that its paint mark aligns with the rib of the air pump as shown in the illustration labeled B.

HINT:
·

Make sure the paint mark of the No. 1 air injection system hose is facing upward.

·

Make sure the direction of the hose clamp is as shown in the illustration.




Hide 17613 3.INSTALL AIR PUMP COVER

a.
A273789C02
2.792,1.552 2.635,1.552 2.635,1.552 2.271,1.771 true 2.823,1.469 2.979,1.635 0.156,0.167 10 false *1

Install the air pump cover with the 3 claws.

Text in Illustration
*1 Inlet

HINT:

Make sure the inlet of the air pump cover is oriented correctly and completely attached when installing the air pump cover.