Home › Engine / Hybrid System › 1KD-FTV (EMISSION CONTROL) › VACUUM REGULATING VALVE › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053673 1KD-FTV EMISSION CONTROL _0260615 VACUUM REGULATING VALVE A

1KD-FTV EMISSION CONTROL  VACUUM REGULATING VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

a.

Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.
A223493E01
1.927,2.427 1.615,1.948 1.615,1.948 1.542,1.948 true 2.125,2.563 2.5,2.656 2.5,2.656 2.583,2.656 true 1.344,1.865 1.531,2.052 0.188,0.188 10 true *1 2.583,2.563 2.771,2.771 0.188,0.208 10 true *2

Connect the 4 vacuum hoses.

Text in Illustration
*1 Yellow Mark
*2 Pink Mark

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



c.

Connect the connector.


Hide 23265C 2.INSTALL GAS FILTER WITH GAS FILTER BRACKET

a.

Install the gas filter with gas filter bracket with the bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Connect the 2 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



Hide 25625 3.INSTALL EGR VALVE BRACKET

a.

Install the EGR valve bracket with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 82121 4.CONNECT ENGINE WIRE

a.

Attach the clamp and connect the engine wire.