Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (for Rear) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260628 EXHAUST GAS TEMPERATURE SENSOR(for Rear) A

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for Rear)  REMOVAL  


PROCEDURE

Hide 89425C 1.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.
A355521

Disconnect the connector from the No. 4 exhaust gas temperature sensor.


b.
A355522

Detach the 2 clamps and disconnect the No. 4 exhaust gas temperature sensor from the sensor bracket.


c.
A355523

Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor from the center exhaust pipe assembly.