Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › UREA PUMP CONTROL ECU › 2015.06–2021.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260633 UREA PUMP CONTROL ECU A

1GD-FTV EMISSION CONTROL  UREA PUMP CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 896B1 1.INSTALL UREA PUMP CONTROL ECU

a.

Install the urea pump control ECU to the No. 1 urea pump control bracket with the 3 bolts.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


b.

Temporarily install the No. 1 urea pump control bracket to the frame LH with the 3 bolts.


c.
A352195E02
2.531,0.802 2.667,0.958 0.135,0.156 10 true 1 1.073,0.885 1.208,1.042 0.135,0.156 10 true 2 1.073,1.531 1.208,1.688 0.135,0.156 10 true 3

Tighten the 3 bolts in the order shown in the illustration.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


d.

Install the No. 4 urea pump control bracket to the urea pump control ECU.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


e.

Attach the 3 clamps and connect the wire harness to the No. 4 urea pump control bracket and No. 1 urea pump control bracket.


f.
A352191

Connect the connector to the urea pump control ECU.

NOTICE:

When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and urea pump control ECU.



Hide 89677B 2.INSTALL NO. 3 UREA PUMP CONTROL BRACKET

a.

Install the No. 3 urea pump control bracket to the No. 4 urea pump control bracket with the bolt.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 89678A 3.INSTALL NO. 2 UREA PUMP CONTROL BRACKET

a.

Install the No. 2 urea pump control bracket to the frame LH with the 3 bolts.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)