Home › Engine / Hybrid System › 1GR-FE (INTAKE / EXHAUST) › EXHAUST PIPE
RM27T0E _51 Engine / Hybrid System _053678 1GR-FE INTAKE / EXHAUST _0260644 EXHAUST PIPE A

1GR-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and disconnect the tailpipe from the exhaust pipe support.


b.

Remove the gasket and exhaust pipe support.


Hide 17420 2.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs, and then disconnect the center exhaust pipe from the 3 exhaust pipe supports.


b.

Remove the gasket.


Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Disconnect the heated oxygen sensor connector.


b.

Remove the 2 nuts and front exhaust pipe.


c.

Remove the gasket.


Hide 17548 4.REMOVE EXHAUST PIPE STOPPER BRACKET

a.

Remove the 2 bolts and stopper bracket.


Hide 17450B 5.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

a.

Disconnect the heated oxygen sensor connector.


b.

Remove the 2 nuts and front exhaust pipe.


c.

Remove the gasket.


Hide 89465 6.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

Hide 89465 7.REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)