Home › Engine / Hybrid System › 1KD-FTV (INTAKE / EXHAUST) › EXHAUST MANIFOLD W/ TURBOCHARGER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053679 1KD-FTV INTAKE / EXHAUST _0260647 EXHAUST MANIFOLD W/ TURBOCHARGER G

1KD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER  INSPECTION  


PROCEDURE

Hide 17201 1.VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY

A220776E01
0.497,3.338 0.685,3.489 0.188,0.150 10 *1 1.561,3.427 0.71,3.427 false

a.

Check for deformation and cracks in the turbine wheel on the exhaust side.

Text in Illustration
*1 Turbine Wheel

If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.


Hide 17201 2.INSPECT AXIAL PLAY OF TURBINE SHAFT

a.

Using a dial indicator, insert the needle of the dial indicator into the exhaust side of the turbine shaft.


b.
A110334

Move the turbine shaft in the axial direction and measure the axial play of the turbine shaft.

Maximum axial play:

0.11 mm (0.00433 in.)


If the axial play is more than the maximum, replace the turbocharger sub-assembly.


Hide 17201 3.INSPECT RADIAL PLAY OF TURBINE SHAFT

a.

Using a dial indicator, insert the needle of the dial indicator into the oil outlet hole, and set it against the center of the turbine shaft.


b.
A110336

Move the turbine shaft in the radial direction and measure the radial play of the turbine shaft.

Maximum radial play:

0.112 mm (0.00441 in.)


If the radial play is more than the maximum, replace the turbocharger sub-assembly.


Hide 17201 4.CHECK TURBINE SHAFT ROTATION

a.
A220777

Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.

HINT:

Even if it takes effort a little to rotate the turbine wheel, this is not a problem.


If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.