Home › Engine / Hybrid System › 1GD-FTV (INTAKE / EXHAUST) › EXHAUST MANIFOLD W/ TURBOCHARGER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053680 1GD-FTV INTAKE / EXHAUST _0260655 EXHAUST MANIFOLD W/ TURBOCHARGER A

1GD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE TURBOCHARGER VANE CONTROL ROD SUB-ASSEMBLY

A347075

a.

Secure the flange of the turbine housing sub-assembly of the turbocharger sub-assembly in a vise between aluminum plates.

NOTICE:

Do not tighten the vise more than necessary, as doing so will damage the flange of the turbine housing sub-assembly.



b.
A347076

Remove the 2 E-washers from the variable nozzle vane motor assembly and turbocharger vane control link sub-assembly.

NOTICE:

Do not reuse the E-washer.



c.

Remove the turbocharger vane control rod sub-assembly.


Hide 2.REMOVE TURBOCHARGER NOZZLE VANE CONTROL ACTUATOR

A347077

a.

Remove the 3 bolts and turbocharger nozzle vane control actuator.