Home › Engine / Hybrid System › 1KD-FTV (COOLING) › THERMOSTAT › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053682 1KD-FTV COOLING _0260665 THERMOSTAT G

1KD-FTV COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 1.INSPECT THERMOSTAT

HINT:
G035894

The valve opening temperature is inscribed on the thermostat.


a.

Immerse the thermostat in water, and then gradually heat the water.


b.

Check the valve opening temperature.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not within the specified range, replace the thermostat.



c.
A224964E02
2.823,1.802 2.708,1.802 2.708,1.802 2.458,1.875 false 2.844,1.708 3.031,1.865 0.188,0.156 10 false *1

Check the valve lift.

Standard valve lift:

10.5 to 12.5 mm (0.413 to 0.496 in.) at 95°C (203°F)


Text in Illustration
*1 Valve Lift

If the valve lift is not as specified, replace the thermostat.



d.

Check that the valve is fully closed when the thermostat temperature is below 77°C (171°F).

If the valve is not fully closed, replace the thermostat.