Home › Engine / Hybrid System › 1GD-FTV (COOLING) › THERMOSTAT
RM27T0E _51 Engine / Hybrid System _053685 1GD-FTV COOLING _0260679 THERMOSTAT G

1GD-FTV COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:

The valve opening temperature is inscribed on the thermostat.


G035894

a.

Immerse the thermostat in water and then gradually heat the water.


b.

Check the valve opening temperature of the thermostat.

Standard Valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not within the specified range, replace the thermostat.


c.
A224964

Check the valve lift.

Standard Valve lift:

10 mm (0.394 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is below 77°C (171°F)..

If it is not fully closed, replace the thermostat.