Home › Engine / Hybrid System › 2TR-FE (LUBRICATION) › OIL PUMP
RM27T0E _51 Engine / Hybrid System _053686 2TR-FE LUBRICATION _0260684 OIL PUMP A

2TR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP ROTOR SET

a.
A336805E01
1.302,0.802 0.438,1.542 0.438,1.542 1.167,0.688 true 0.271,1.469 0.469,1.688 0.198,0.219 10 false *a

Coat the oil pump rotor set with engine oil and place it into oil pump body with the alignment marks facing outward (oil pump cover side). Check that the oil pump rotor set revolves smoothly.

Text in Illustration
*a Alignment Mark


Hide 2.INSTALL OIL PUMP COVER

a.

Install the oil pump cover to the timing chain cover sub-assembly with the 2 bolts and 6 screws.

Torque:
for bolt : 8.9 N*m (91 kgf*cm, 79 in.*lbf)
for screw : 10 N*m (105 kgf*cm, 8 ft.*lbf)


Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil.


b.

Insert the oil pump relief valve and oil pump relief valve spring into the oil pump relief valve hole.


c.

Install a new gasket to the oil pump relief valve plug.


d.

Using a 27 mm socket wrench, install the oil pump relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)