Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM27T0E _51 Engine / Hybrid System _053687 1GR-FE LUBRICATION _0260689 OIL LEVEL SENSOR G

1GR-FE LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

A184466E04
1.792,0.74 2.448,0.396 2.448,0.396 2.646,0.396 true 1.917,0.917 2.573,1.188 2.573,1.188 2.771,1.188 true 2.74,0.323 3.281,0.552 0.542,0.229 10 false 1 (LVL) 2.979,2.396 3.281,2.604 0.302,0.208 10 false ON 2.969,2.865 3.302,3.083 0.333,0.219 10 false OFF 2.854,1.094 3.24,1.313 0.385,0.219 10 false 2 (E)

a.

Partially immerse the sensor in an oil bath and warm up the oil bath.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (LVL) - 2 (E) ON, 20°C (68°F) Below 1 Ω
OFF, 20°C (68°F) Below 1 Ω
ON, 60°C (140°F) Below 1 Ω
OFF, 60°C (140°F) 10 kΩ or higher


If the result is not as specified, replace the sensor.