Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM27T0E _51 Engine / Hybrid System _053687 1GR-FE LUBRICATION _0260689 OIL LEVEL SENSOR A

1GR-FE LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


PROCEDURE

Hide 51405A 2.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 51450 3.REMOVE REAR ENGINE UNDER COVER ASSEMBLY

Hide 89491 5.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the connector.


b.
A221160

Remove the 4 bolts and sensor.


c.

Cut away part of the gasket and remove the gasket from the engine oil level sensor.

HINT:

Remove only the outer part of the gasket.