Home › Engine / Hybrid System › 5L-E (LUBRICATION) › OIL PRESSURE SWITCH
RM27T0E _51 Engine / Hybrid System _053688 5L-E LUBRICATION _0260694 OIL PRESSURE SWITCH G

5L-E LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the oil pressure switch connector.


b.

Start the engine.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher


If the result is not as specified, replace the oil pressure switch assembly.