Home › Engine / Hybrid System › 5L-E (LUBRICATION) › OIL PUMP
RM27T0E _51 Engine / Hybrid System _053688 5L-E LUBRICATION _0260695 OIL PUMP A

5L-E LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15121 1.INSTALL OIL PUMP DRIVE GEAR

a.

Place the timing belt case on wooden blocks.

NOTICE:

Do not damage the timing pointer.



b.
A057459E03
1.875,0.281 2.5,0.583 2.5,0.583 1.917,0.896 true 2.563,0.5 2.771,0.688 0.208,0.188 10 false *1

Insert the drive and driven gears into the timing belt case with the marks facing the oil pump cover side.

Text in Illustration
*1 Mark


Hide 15115 2.INSTALL OIL PUMP COVER

a.

Apply adhesive to 2 or 3 threads of the screws.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Install the oil pump cover with the 8 screws.

Torque:
10 N*m (105 kgf*cm, 8 ft.*lbf)


Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.

Insert the relief valve and spring into the installation hole of the timing belt case.


b.

Using a 12 mm hexagon wrench, install a new gasket and the plug.

Torque:
37 N*m (375 kgf*cm, 27 ft.*lbf)