Home › Engine / Hybrid System › 1KD-FTV (LUBRICATION) › OIL PRESSURE SWITCH › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053689 1KD-FTV LUBRICATION _0260699 OIL PRESSURE SWITCH A

1KD-FTV LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the oil pressure sensor.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the sensor.



b.

Using a 24 mm deep socket wrench, install the oil pressure sensor.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after the installation.



c.

Connect the engine oil pressure switch connector.