Home › Engine / Hybrid System › 1KD-FTV (LUBRICATION) › OIL LEVEL SENSOR › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053689 1KD-FTV LUBRICATION _0260702 OIL LEVEL SENSOR G

1KD-FTV LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A224687E02
2.229,0.667 2.844,0.24 2.844,0.24 3,0.24 true 2.333,0.823 2.917,1.573 2.917,1.573 3.063,1.573 true 2.979,2.406 3.146,2.563 0.167,0.156 10 false *1 0.146,0.135 0.313,0.292 0.167,0.156 10 false *a 2.99,2.823 3.156,2.979 0.167,0.156 10 false *2 3.094,0.156 3.313,0.333 0.219,0.177 10 false 1 3.156,1.49 3.354,1.646 0.198,0.156 10 false 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 on Below 0.5 Ω
off 1 MΩ or higher


Text in Illustration
*1 on
*2 off
*a Component without harness connected
(Engine Oil Level Sensor)

If the result is not as specified, replace the engine oil level sensor.