Home › Engine / Hybrid System › 1KD-FTV (LUBRICATION) › OIL PRESSURE SWITCHING VALVE › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053689 1KD-FTV LUBRICATION _0260703 OIL PRESSURE SWITCHING VALVE G

1KD-FTV LUBRICATION  OIL PRESSURE SWITCHING VALVE  INSPECTION  


PROCEDURE

Hide 15350 1.INSPECT OIL PRESSURE SWITCHING VALVE ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 13 to 17 Ω


If the result is not as specified, replace the oil pressure switching valve assembly.


b.
A231900E07
1.531,0.677 0.906,1.052 0.906,1.052 0.781,1.052 true 1.927,0.677 2.552,1.052 2.552,1.052 2.667,1.052 true 0.615,0.958 0.844,1.146 0.229,0.188 12 false 1 2.75,0.948 2.948,1.146 0.198,0.198 12 false 2

Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check that the operating sound of the oil pressure switching valve can be head.

NOTICE:
·

These tests must be performed within 10 seconds to prevent the coil from burning out.

·

Always turn the voltage on and off on the battery side, not the oil pressure switching valve side.



If the result is not as specified, replace the oil pressure switching valve.