Home › Engine / Hybrid System › 1KD-FTV (LUBRICATION) › OIL PRESSURE SENSOR › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053689 1KD-FTV LUBRICATION _0260704 OIL PRESSURE SENSOR A

1KD-FTV LUBRICATION  OIL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 83520 1.INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the oil pressure sender gauge.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the oil pressure sender gauge.



b.

Using a 27 mm deep socket wrench, install the oil pressure sender gauge.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the engine oil pressure sender gauge connector.


Hide 2.ADD ENGINE OIL