Home › Engine / Hybrid System › 1GD-FTV (LUBRICATION) › OIL LEVEL SENSOR › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053690 1GD-FTV LUBRICATION _0260708 OIL LEVEL SENSOR A

1GD-FTV LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect the engine oil level sensor connector.


Hide 2.INSTALL WIRING HARNESS CLAMP BRACKET (w/ Urea SCR System)

a.

Install the wiring harness clamp bracket with the bolt.

Torque:
13 N*m (131 kgf*cm, 9 ft.*lbf)


b.

Attach the 3 clamps to connect the wire harness.