Home › Engine / Hybrid System › 2TR-FE (STARTING) › STARTER (for 2.0 kW Type)
RM27T0E _51 Engine / Hybrid System _053691 2TR-FE STARTING _0260714 STARTER(for 2.0 kW Type) A

2TR-FE STARTING  STARTER(for 2.0 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A074096

Remove the nut, and then disconnect the lead wire from terminal C.


b.

Remove the 2 through bolts.


c.

Pull out the starter yoke together with the starter armature.


d.

Remove the O-ring from the starter yoke.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

A161053

a.

Remove the 2 screws and magnet starter switch.


b.
A161054E05
0.792,0.698 0.948,0.188 0.948,0.188 1.063,0.188 false 1.781,1.75 1.979,1.917 1.979,1.917 2.063,1.917 false 0.521,1.76 0.604,1.438 0.604,1.438 0.688,1.438 false 1.323,0.5 1.406,0.177 1.406,0.177 1.49,0.177 false 0.365,0.844 0.448,0.323 0.448,0.323 0.531,0.323 false 2.896,1 2.979,0.344 2.979,0.344 3.063,0.344 false 3.125,0.281 3.292,0.438 0.167,0.156 10 false *1 1.552,0.115 1.729,0.271 0.177,0.156 10 false *6 1.115,0.115 1.292,0.271 0.177,0.156 10 false *5 2.052,1.833 2.24,1.99 0.188,0.156 10 false *2 0.594,0.25 0.771,0.406 0.177,0.156 10 false *4 0.74,1.365 0.917,1.521 0.177,0.156 10 false *3

Remove the idle gear, retainer, clutch roller, return spring and starter clutch from the starter drive housing.

Text in Illustration
*1 Starter Drive Housing
*2 Starter Clutch
*3 Return Spring
*4 Clutch Roller
*5 Retainer
*6 Idle Gear


c.
A115020E20
2.146,0.885 1.906,1.021 1.906,1.021 1.906,1.667 false 1.823,1.677 2,1.833 0.177,0.156 10 false *1

Using a magnet hand, remove the steel ball from the clutch.

Text in Illustration
*1 Magnet Hand


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A062428

Remove the 2 screws and commutator end frame from the starter yoke.


b.

Remove the O-ring from the starter yoke.


c.

Disconnect the 4 brushes from the starter brush holder.

i.
U147414

Using a screwdriver, hold back the brush spring.


ii.

Disconnect the brush from the brush holder.



d.

Remove the brush holder from the starter yoke.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.

Remove the starter armature from the starter yoke.