Home › Engine / Hybrid System › 2TR-FE (STARTING) › IGNITION SWITCH
RM27T0E _51 Engine / Hybrid System _053691 2TR-FE STARTING _0260715 IGNITION SWITCH A

2TR-FE STARTING  IGNITION SWITCH  INSTALLATION  


PROCEDURE

Hide 84450 1.INSTALL IGNITION SWITCH ASSEMBLY

a.
A222876

for Manual Transmission:

i.

Install the ignition switch with the 2 screws.


ii.

Connect the ignition switch connector and attach the wire harness clamp.



b.
A222874

for Automatic Transmission:

i.

Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.


ii.

Install the ignition switch with the 2 screws.


iii.

Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.



Hide 45287 2.INSTALL LOWER STEERING COLUMN COVER

a.
A222873

Attach the 2 claws to install the lower steering column cover.


b.

Install the 2 screws.

HINT:

Turn the steering wheel to the right and left as necessary to install the 2 screws.