Home › Engine / Hybrid System › 1GR-FE (STARTING) › ENGINE SWITCH (for RHD) › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053692 1GR-FE STARTING _0260721 ENGINE SWITCH(for RHD) G

1GR-FE STARTING  ENGINE SWITCH(for RHD)  INSPECTION  


PROCEDURE

Hide 1.INSPECT ENGINE SWITCH

a.
A129763E09
0.058,0.821 0.359,0.977 0.302,0.156 10 SS1 0.114,0.11 0.304,0.266 0.191,0.156 10 *a 1.803,0.208 2.178,0.389 0.375,0.181 10 GND 2.89,0.208 3.219,0.370 0.330,0.163 10 SS2 2.817,0.289 2.688,0.289 2.688,0.289 2.434,0.914 false 1.751,0.306 1.614,0.306 1.614,0.306 1.416,0.905 false 0.41,0.903 0.757,0.903 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
7 (SS1) - 5 (GND) Pushed Below 1 Ω
2 (SS2) - 5 (GND) Pushed Below 1 Ω
7 (SS1) - 5 (GND) Not pushed 10 kΩ or higher
2 (SS2) - 5 (GND) Not pushed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Engine Switch)

If the result is not as specified, replace the engine switch.


b.

Apply battery voltage to the terminals of the switch and check the illumination condition of the switch.

A385843E01
1.646,0.844 1.99,0.292 1.99,0.292 2.438,0.292 false 3.052,0.979 3.531,0.979 3.531,0.979 4.115,1.271 true 3.677,0.406 3.958,0.406 3.958,0.406 4.427,1.271 true 4.427,0.917 4.75,0.25 4.75,0.25 5.063,0.25 true 4.708,1.26 5.063,0.563 5.063,0.563 5.823,0.563 true 2.51,0.219 2.823,0.417 0.313,0.198 10 false *1 2.646,0.896 3.24,1.156 0.594,0.26 10 false INDW 3.51,0.063 3.823,0.26 0.313,0.198 10 false *a 3.302,0.333 3.917,0.531 0.615,0.198 10 false INDS 5.115,0.177 5.573,0.375 0.458,0.198 10 false GND 5.885,0.479 6.5,0.677 0.615,0.198 10 false SWIL

Text in Illustration
*1 Indicator Light - -
*a Component without harness connected
(Engine Switch)
- -

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 11 (SWIL)
Battery negative (-) → Terminal 5 (GND)
Illuminates (illumination of lettering)
Battery positive (+) → Terminal 12 (INDS)
Battery negative (-) → Terminal 5 (GND)
Illuminates (green)
Battery positive (+) → Terminal 13 (INDW)
Battery negative (-) → Terminal 5 (GND)
Illuminates (amber)


NOTICE:
·

If the positive (+) lead and negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.

·

If the voltage is too low, the indicator will not illuminate.



If the result is not as specified, replace the engine switch.