Home › Engine / Hybrid System › 5L-E (STARTING) › STARTER
RM27T0E _51 Engine / Hybrid System _053693 5L-E STARTING _0260723 STARTER A

5L-E STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.

Remove the screw and terminal 50 wire.


b.
A222267E01
1.413,0.017 1.602,0.177 0.188,0.161 10 *1 2.017,0.299 1.729,0.096 1.729,0.096 1.625,0.096 false

Remove the nut and disconnect the terminal C wire.

Text in Illustration
*1 Terminal C


c.

Remove the 2 through bolts and O-rings and pull out the starter yoke with the armature.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A222268

Remove the 2 screws and magnet starter switch.


b.

Remove the return spring.


c.
B000464E05
0.979,0.896 1.146,0.438 1.146,0.438 1.229,0.438 false 0.76,1.823 0.51,1.698 0.51,1.698 0.438,1.698 false 1.052,1.646 0.5,1.302 0.5,1.302 0.417,1.302 false 2.063,1.708 2.177,1.823 2.177,1.823 2.26,1.823 false 1.563,1.771 1.688,1.906 1.688,1.906 1.771,1.906 false 1.281,0.365 1.458,0.51 0.177,0.146 10 false *1 0.271,1.229 0.448,1.375 0.177,0.146 10 false *4 0.271,1.635 0.448,1.781 0.177,0.146 10 false *5 2.313,1.75 2.49,1.896 0.177,0.146 10 false *2 1.823,1.833 2,1.979 0.177,0.146 10 false *3

Remove the starter clutch, starter armature pinion, starter idle pinion, retainer and clutch roller from the starter drive housing.

Text in Illustration
*1 Starter Clutch
*2 Starter Armature Pinion
*3 Starter Idle Pinion
*4 Retainer
*5 Clutch Roller


d.
P005056E04
1.875,0.656 2.281,0.115 2.281,0.115 2.375,0.115 false 2.385,0.031 2.563,0.188 0.177,0.156 10 false *1

Using a magnet hand, remove the steel ball from the clutch shaft hole.

Text in Illustration
*1 Magnet Hand


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
N000562

Disconnect the 4 brushes from the starter brush holder.

i.

Using a screwdriver, hold back the brush spring.


ii.

Disconnect the brush from the starter brush holder.



b.

Remove the starter brush holder.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.
A222477

Using a plastic-faced hammer, tap the end of the starter yoke and remove the starter armature.