Home › Engine / Hybrid System › 5L-E (STARTING) › GLOW PLUG
RM27T0E _51 Engine / Hybrid System _053693 5L-E STARTING _0260725 GLOW PLUG G

5L-E STARTING  GLOW PLUG  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 19850 1.INSPECT GLOW PLUG

NOTICE:

Turn the ignition switch off for 60 seconds before performing this inspection.


a.
A222782

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
Glow plug terminal - Body ground 20°C (68°F) Approximately
1.0 Ω


NOTICE:
·

Do not damage the glow plug pipes as doing so could cause an open circuit or shorten the life of the glow plugs.

·

Prevent oil and gasoline from contacting the glow plugs when cleaning them.

·

During the inspection, be sure to wipe off any oil on the terminal and Bakelite washer with a dry cloth.

·

Do not apply more than 11 V to the glow plug as it could cause an open circuit.