Home › Engine / Hybrid System › 5L-E (STARTING) › PRE-HEATING SYSTEM
RM27T0E _51 Engine / Hybrid System _053693 5L-E STARTING _0260726 PRE-HEATING SYSTEM G

5L-E STARTING  PRE-HEATING SYSTEM  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:

Turn the ignition switch off for 60 seconds before performing the following inspections.


PROCEDURE

Hide 1.INSPECT LIGHTING TIME OF GLOW INDICATOR LIGHT

a.
A112489E05
0.104,1.643 0.319,1.843 0.215,0.200 10 *a 1.875,3.016 2.090,3.179 0.215,0.163 10 *b 0.659,1.074 0.789,1.261 0.129,0.188 10 6 0.519,1.402 0.771,1.560 0.252,0.159 10 4.5 0.524,1.86 0.764,2.027 0.240,0.167 10 2.3 0.519,2.049 0.765,2.216 0.246,0.167 10 1.2 0.524,2.224 0.770,2.391 0.246,0.167 10 0.9 0.668,2.381 0.798,2.552 0.130,0.171 10 0 1.057,2.482 1.320,2.657 0.263,0.175 10 -13 1.165,2.663 1.286,2.830 0.121,0.167 10 9 1.498,2.482 1.627,2.649 0.129,0.167 10 8 1.448,2.663 1.644,2.826 0.196,0.163 10 46 1.807,2.482 2.016,2.632 0.209,0.150 10 28 1.811,2.663 2.021,2.830 0.210,0.167 10 82 2.276,2.482 2.476,2.649 0.200,0.167 10 55 2.224,2.663 2.487,2.843 0.263,0.179 10 131 2.771,2.482 2.951,2.641 0.179,0.159 10 83 2.729,2.663 2.988,2.822 0.259,0.159 10 181 3.078,2.479 3.375,2.668 0.297,0.189 10 (°C) 3.1,2.79 3.381,2.969 0.281,0.179 10 (°F) 0.257,0.66 0.663,0.830 0.406,0.170 10 (sec.)

Turn the ignition switch to ON and measure the length of time that the light remains illuminated.

Lighting time:

Refer to the graph


Text in Illustration
*a Glow Indicator Lighting Time
*b Engine Coolant Temperature

If the result is not as specified, check the ECM, engine coolant temperature sensor, glow plugs and glow plug relay.


Hide 2.INSPECT PRE-HEATING

a.
A112490E06
1.809,2.728 1.996,2.920 0.187,0.192 10 *b 0.718,2.477 0.829,2.607 0.110,0.130 6 0 1.386,2.467 1.570,2.597 0.184,0.130 6 12 1.655,2.468 1.928,2.598 0.273,0.130 6 12.5 2.287,2.463 2.560,2.593 0.273,0.130 6 13.5 2.666,2.459 2.850,2.589 0.184,0.130 6 14 2.936,2.46 3.209,2.590 0.273,0.130 6 14.5 0.351,0.837 0.623,0.967 0.273,0.130 6 10.5 0.428,0.947 0.613,1.077 0.184,0.130 6 10 0.423,1.204 0.608,1.334 0.185,0.130 6 8.4 0.481,1.307 0.581,1.437 0.100,0.130 6 8 0.419,1.407 0.604,1.538 0.185,0.130 6 7.4 0.407,1.498 0.595,1.632 0.187,0.134 6 6.8 0.489,1.613 0.589,1.743 0.100,0.130 6 6 0.414,1.797 0.579,1.927 0.165,0.130 6 4.7 0.493,1.956 0.593,2.086 0.100,0.130 6 4 0.486,2.22 0.596,2.350 0.110,0.130 6 0 2.022,2.462 2.147,2.592 0.125,0.130 6 13 0.023,1.438 0.219,1.615 0.196,0.177 10 *a 0.034,0.409 0.433,0.586 0.399,0.177 10 (sec.) 2.953,2.613 3.186,2.788 0.232,0.174 10 (V)

Turn the ignition switch to ON and measure the length of time that battery voltage is applied to the glow plugs.

Pre-heating Time :
Engine Coolant Temperature Specified Condition
40°C (104°F) or higher 1 second
Below 40°C (104°F) Refer to the graph
(15 seconds at longest)


Text in Illustration
*a Pre-heating Time
*b Battery Voltage

If the result is not as specified, check the ECM, engine coolant temperature sensor, glow plugs and glow plug relay.


b.

Turn the ignition switch to START, and check that battery voltage is applied to the glow plugs.


c.

While cranking the engine, measure the time that battery voltage is applied to the glow plugs.

Pre-heating Time:
Engine Coolant Temperature Specified Condition
40°C (104°F) or higher 1 second
Below 40°C (104°F) Refer to the graph (15 seconds at longest)



Hide 3.INSPECT AFTER GLOW TIME

a.
A112491E02
0.1,1.67 0.310,1.854 0.211,0.184 10 *a 1.76,2.978 1.960,3.154 0.200,0.175 10 *b 0.456,0.985 0.722,1.167 0.267,0.181 10 120 0.467,1.211 0.734,1.393 0.267,0.181 10 100 0.54,1.438 0.758,1.620 0.218,0.181 10 80 0.539,1.652 0.757,1.833 0.218,0.181 10 60 0.526,1.858 0.756,2.054 0.230,0.196 10 40 0.53,2.044 0.760,2.241 0.230,0.196 10 20 0.526,2.223 0.756,2.420 0.230,0.196 10 10 0.631,2.424 0.768,2.581 0.137,0.157 10 0 0.959,2.435 1.272,2.637 0.313,0.203 10 -20 1.043,2.623 1.273,2.820 0.230,0.196 10 -4 1.373,2.435 1.510,2.592 0.137,0.157 10 0 1.304,2.626 1.534,2.822 0.230,0.196 10 32 1.624,2.44 1.854,2.637 0.230,0.196 10 20 1.626,2.628 1.844,2.810 0.218,0.181 10 68 2.23,2.445 2.448,2.627 0.218,0.181 10 60 1.91,2.44 2.140,2.637 0.230,0.196 10 40 2.527,2.448 2.745,2.629 0.218,0.181 10 80 1.868,2.627 2.135,2.809 0.267,0.181 10 104 2.182,2.64 2.449,2.821 0.267,0.181 10 140 2.499,2.635 2.766,2.816 0.267,0.181 10 176 2.92,2.409 3.290,2.609 0.370,0.200 10 (°C) 2.916,2.643 3.287,2.803 0.370,0.160 10 (°F) 0.254,0.574 0.662,0.751 0.408,0.177 10 (sec.)

After starting the engine, measure the time that battery voltage is applied to the terminal SREL of the ECM.

After glow time:

Refer to the graph


Text in Illustration
*a After Glow Time
*b Engine Coolant Temperature

If the result is not as specified, check the ECM, engine coolant temperature sensor, glow plugs and glow plug relay.