Home › Engine / Hybrid System › 5L-E (STARTING) › RELAY
RM27T0E _51 Engine / Hybrid System _053693 5L-E STARTING _0260727 RELAY G

5L-E STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A092673E97
0.25,0.781 0.375,1.01 0.125,0.229 10 true 3 1.281,0.792 1.396,0.948 0.115,0.156 10 true 5 0.26,1.302 0.385,1.531 0.125,0.229 10 true 2 1.292,1.333 1.406,1.49 0.115,0.156 10 true 1 1.438,1.052 1.552,1.24 0.115,0.188 10 true 3 3.146,1.042 3.302,1.229 0.156,0.188 10 true 5 2.708,0.365 2.885,0.552 0.177,0.188 10 true 2 1.948,1.74 2.083,1.927 0.135,0.188 10 true 1

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.


Hide 28610 2.INSPECT GLOW RELAY

a.
A092673E98
0.24,0.76 0.385,0.979 0.146,0.219 10 true 3 1.281,0.771 1.406,0.979 0.125,0.208 10 true 5 1.292,1.323 1.469,1.51 0.177,0.188 10 true 2 0.24,1.302 0.385,1.521 0.146,0.219 10 true 1 1.438,1.042 1.573,1.219 0.135,0.177 10 true 3 3.146,1.042 3.313,1.271 0.167,0.229 10 true 5 2.698,0.365 2.875,0.531 0.177,0.167 10 true 2 1.958,1.729 2.125,1.917 0.167,0.188 10 true 1

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow relay.