Home › Engine / Hybrid System › 1KD-FTV (STARTING) › STARTER (for 2.2 kW Type) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053694 1KD-FTV STARTING _0260731 STARTER(for 2.2 kW Type) A

1KD-FTV STARTING  STARTER(for 2.2 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
P013020

Remove the nut and disconnect the lead wire from terminal C.


b.
A074859

Remove the 2 bolts and 2 O-rings.


c.

Pull out the starter yoke together with the starter armature.


d.

Remove the O-ring from the starter yoke.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A102596

Remove the 2 bolts and magnet starter switch.


b.
U169204E02
1.74,0.448 1.823,0.219 1.823,0.219 1.906,0.219 false 2.052,0.74 2.198,0.229 2.198,0.229 2.292,0.229 false 2.479,0.854 2.583,0.417 2.583,0.417 2.667,0.417 false 2.781,1.521 2.875,1.271 2.875,1.271 2.979,1.271 false 1.969,1.667 1.729,1.802 1.729,1.802 1.635,1.802 false 0.656,1.167 0.438,0.719 0.438,0.719 0.344,0.719 false 1.927,0.135 2.094,0.302 0.167,0.167 10 false *2 2.323,0.146 2.49,0.313 0.167,0.167 10 false *3 2.698,0.333 2.865,0.5 0.167,0.167 10 false *5 3.031,0.344 3.198,0.51 0.167,0.167 10 false *4 3,1.198 3.167,1.365 0.167,0.167 10 false *1 1.427,1.719 1.594,1.885 0.167,0.167 10 false *6 0.156,0.625 0.323,0.792 0.167,0.167 10 false *7

Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.

Text in Illustration
*1 Return Spring
*2 Pinion Gear
*3 Idler Gear
*4 Clutch Roller
*5 Retainer
*6 Starter Clutch
*7 Starter Housing


c.
A115020E18
2.688,0.417 2.573,0.417 2.573,0.417 2.146,0.74 false 2.76,0.323 2.927,0.49 0.167,0.167 10 false *1

Using a magnet hand, remove the steel ball from the starter clutch hole.

Text in Illustration
*1 Magnet Hand


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

N000562

a.

Disconnect the 4 starter yoke brushes from the starter brush holder.

i.

Using a screwdriver, pull back the spring.


ii.

Disconnect the brush from the starter brush holder.



b.

Remove the starter brush holder from the starter yoke.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.
A222477

Using a plastic-faced hammer, tap the starter yoke to remove the starter armature from the starter yoke.