Home › Engine / Hybrid System › 1KD-FTV (STARTING) › STARTER (for 2.7 kW Type) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053694 1KD-FTV STARTING _0260732 STARTER(for 2.7 kW Type) A

1KD-FTV STARTING  STARTER(for 2.7 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A115884E02
0.918,1.68 1.126,1.846 0.208,0.167 10 *1 1.71,1.524 1.196,1.754 1.196,1.754 1.119,1.754 false

Remove the nut and disconnect the lead wire from terminal C.

Text in Illustration
*1 Terminal C


b.

Remove the 2 through bolts.


c.

Pull out the starter yoke with the armature.


d.

Remove the felt washer from the starter armature.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A102626

Remove the 3 screws and magnet starter switch.


b.
A385845E01
0.271,0.708 0.49,0.708 0.49,0.708 0.583,1.031 false 0.969,0.313 1.188,0.313 1.188,0.313 1.281,0.635 false 1.031,1.813 1.052,1.927 1.052,1.927 1.208,1.927 false 1.438,1.708 1.49,1.979 1.49,1.979 1.656,1.979 false 1.865,1.667 1.969,2.021 1.969,2.021 2.25,2.021 false 3.01,1.813 2.823,1.813 2.823,1.813 2.708,1.479 false 0.104,0.625 0.417,0.823 0.313,0.198 10 false *1 0.781,0.229 1.094,0.427 0.313,0.198 10 false *5 1.25,1.844 1.563,2.042 0.313,0.198 10 false *3 1.729,1.896 2.042,2.094 0.313,0.198 10 false *4 2.313,1.927 2.625,2.125 0.313,0.198 10 false *2 3.073,1.76 3.385,1.958 0.313,0.198 10 false *6

Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.

Text in Illustration
*1 Return Spring
*2 Idler Gear
*3 Clutch Roller
*4 Retainer
*5 Starter Clutch
*6 Starter Housing


c.
A197146E03
2.427,0.185 2.576,0.185 2.576,0.185 2.576,1.348 false 2.15,0.093 2.337,0.252 0.187,0.159 10 *1

Using a magnet hand, remove the steel ball from the starter clutch.

Text in Illustration
*1 Magnet Hand


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A102628

Remove the 2 screws and commutator end frame from the starter yoke.


b.
A102629

Disconnect the 4 starter yoke brushes from the brush holder.

i.

Using a screwdriver, pull back the spring.


ii.

Disconnect the brush from the brush holder.



c.

Remove the brush holder from the starter armature.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.

Remove the starter armature from the starter yoke.