Home › Engine / Hybrid System › 1KD-FTV (STARTING) › STARTER (for 3.0 kW Type) › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053694 1KD-FTV STARTING _0260733 STARTER(for 3.0 kW Type) A

1KD-FTV STARTING  STARTER(for 3.0 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A102599

Remove the nut and disconnect the lead wire from terminal C.


b.

Remove the 2 bolts.


c.

Pull out the starter yoke together with the starter armature from the magnet switch.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A102600

Remove the 3 screws and magnet starter switch.


b.
A102601E01
0.792,0.129 0.955,0.277 0.163,0.149 10 *2 0.668,0.345 0.830,0.493 0.163,0.149 10 *3 0.542,0.595 0.704,0.744 0.163,0.149 10 *5 0.483,1.28 0.646,1.429 0.163,0.149 10 *4 0.854,1.89 1.017,2.039 0.163,0.149 10 *1 1.79,1.885 1.952,2.034 0.163,0.149 10 *6 2.872,0.18 3.039,0.337 0.167,0.157 10 *7 1.462,0.527 1.139,0.218 1.139,0.218 0.996,0.218 false 1.403,0.836 1.002,0.435 1.002,0.435 0.87,0.435 false 1.18,0.966 0.898,0.681 0.898,0.681 0.756,0.681 false 0.91,1.226 0.78,1.375 0.78,1.375 0.682,1.375 false 0.658,1.816 0.727,1.982 0.727,1.982 0.847,1.982 false 1.448,1.77 1.609,1.97 1.609,1.97 1.758,1.97 false 2.589,0.438 2.754,0.28 2.754,0.28 2.871,0.28 false

Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.

Text in Illustration
*1 Return Spring
*2 Pinion Gear
*3 Idler Gear
*4 Clutch Roller
*5 Retainer
*6 Starter Clutch
*7 Starter Housing


c.
A197146E03
2.427,0.185 2.576,0.185 2.576,0.185 2.576,1.348 false 2.15,0.093 2.337,0.252 0.187,0.159 10 *1

Using a magnet hand, remove the steel ball from the clutch shaft hole.

Text in Illustration
*1 Magnet Hand


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A102621

Disconnect the 4 starter yoke brushes from the starter brush holder.

i.

Using a screwdriver, pull back the spring.


ii.

Disconnect the brush from the starter brush holder.



b.

Remove the starter brush holder from the starter yoke.


c.

Remove the O-ring.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.

Place matchmarks on the starter yoke and commutator end frame.


b.

Remove the starter armature together with the commutator end frame.


c.

Remove the O-ring.


d.
A102604

Using a plastic-faced hammer, tap the end frame to remove the starter armature from the commutator end frame.