Home › Engine / Hybrid System › 1KD-FTV (STARTING) › RELAY › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053694 1KD-FTV STARTING _0260736 RELAY G

1KD-FTV STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A092673E89
1.948,1.75 2.167,1.958 0.219,0.208 10 true 1 2.708,0.333 2.906,0.542 0.198,0.208 10 true 2 1.458,1.052 1.635,1.281 0.177,0.229 10 true 3 3.146,1.031 3.302,1.229 0.156,0.198 10 true 5 1.271,0.781 1.427,0.979 0.156,0.198 10 true 5 1.271,1.323 1.427,1.521 0.156,0.198 10 true 1 0.24,0.771 0.396,0.969 0.156,0.198 10 true 3 0.219,1.313 0.375,1.51 0.156,0.198 10 true 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.


Hide 28610 2.INSPECT GLOW RELAY

a.
A092673E91
0.24,0.781 0.396,0.979 0.156,0.198 10 true 3 0.25,1.313 0.406,1.51 0.156,0.198 10 true 1 1.271,0.802 1.427,1 0.156,0.198 10 true 5 1.271,1.333 1.427,1.531 0.156,0.198 10 true 2 1.458,1.052 1.615,1.25 0.156,0.198 10 true 3 1.979,1.75 2.135,1.948 0.156,0.198 10 true 1 2.708,0.375 2.865,0.573 0.156,0.198 10 true 2 3.135,1.031 3.292,1.229 0.156,0.198 10 true 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow relay.